DIY Nursing Shirt- How to Make a Discreet, Up-Cycled Nursing Top for Breastfeeding in Public

Have you seen/read/heard the poem "Embarrassed" by Hollie McNish? It has become viral on the Internet but if you haven't seen it you can watch it here. In her poem she talks about how mothers are made to feel ashamed for feeding their babies in a public setting. They are made to feel as though breastfeeding is an act of seduction or perversion instead of the simple act of JUST feeding a hungry baby the way BILLIONS of humans have been fed before. Many mom's do not feel comfortable nursing in public and some feel that that a nursing cover or blanket draws extra unwanted attention... so what is a mom to do?

My answer was discreet nursing tops- Tops that pull up and pull down. The only flesh exposed is that which is in your babies mouth. I like this because I 'personally' found it more discreet than nursing covers and less revealing than just pulling my whole shirt down. I purchased a few of the store-bought, "designer" tops which were a bit expensive but a nice splurge and I wore layers and struggled to fish my clothes around and keep them straight. Then I had an epiphany, why not just make some cute nursing tops? They couldn't be that hard to make could they?

Guess what? It's not. Actually I made one in roughly 25 minutes. It came out super cute, it is more functional than layering tops and I spent no money making it. I just used a couple of tops I had laying around that were in the pile to be given away. So raid your drawers, visit a local thrift store, pick out some cute tops (or a dress), and get sewing!

Here's what to do-

First pick two tops.
I chose a stretchy, brown tank to be my top shirt and a cute, lacey, tank that has been sitting in my donate pile because it was way too small and short for my undershirt. Stretchy material works best for the top layer.

Take the undershirt and cut it in half.

Cut off the straps 

and cut the back in half so it opens up.

Hem the bottom. To hem all you need to do fold the bottom up a half inch and then fold it again. Press with an iron to help keep folds straight and pin it.

Use a simple strait stitch to sew the hem. 

Because of the material of my undershirt I did a second layer of stitching to ensure a good hold.

Tada! The under layer is done! Now to attach it to the top shirt. 

First, turn the top shirt inside out with the front of the shirt facing towards you.

Lay your undershirt right side down on top of your top shirt.

Pin the shirts together along the armpit seam. 

Since my undershirt was smaller than my top shirt the seams do not line up perfect, but that is okay. 

Place a pin facing along the top shirt's side seam so you know where to stop sewing.
Pin the left and the right sides this way.

With thread that is an "exact, to close" match to your top shirt, sew the two shirts together along the armpit seam. Try to sew along or as close the top shirt's hem line as you can.

When your two shirts are attached along the armpit seams, place a pin sideways at your side seams to mark the bottom of your undershirt. Your side pins will hold the undershirt in place.

Flip the shirt outside right, and sew along the side seam, directly on top of the seam. 

It is SUPER important that your thread matches your shirt!

Stop at your sideways pin.

If you stayed along the seam you won't be able to see the stitches! :D

Repeat on the other side, then flip the shirt inside out again.
You will see your seam on the inside.

Trim along the seam on both sides. 

You now have an under layer!

Flip your shirt outside right again and enjoy! 

In roughly 25 minutes you made yourself and up-cycled, discreet, nursing top!
If you want to add an extra touch (and your shirts are the same size) You can take the bottom of the undershirt and add it to the bottom of your top shirt for extra length and a layered look.

Nurse on mama! (and don't be ashamed to do it in public!)
<3
Cassandra

DIY Fabric Labels

A super simple, step by step guide to making your own fabric labels!
(These instructions use Microsoft Word and Paint)

Supplies Needed-
An inkjet Printer

1 Package T-Shirt transfer paper

Scissors

Ribbon (Your choice of thickness, polyester or cotton works best)
An Iron
Fray Check (optional)

Step ONE- Create your label.
First select your business image or logo (All text works best but you can use a simple image/decal as well)

Here's mine-

Open your Image in Paint-

If you want to make a single sided tag all you will need to do in this step is reverse your image. 

You can do that by going to the top right corner under rotate, click flip horizontal.

If you plan to make a double sided tag like me, you have a little more work to do. 

You will need to rotate your image one more time to the LEFT. Save as Image 1.

You will then have your 1st image that looks like this.
For a single sided tag- ( You can now move on to Step Two)

For a double sided tag  it should look like this-

 For double sided (folded tags) we can start on the other side
The other side can include your website, care instructions, or just be plain, the choice is yours. I personally wanted to put care instruction on the other side of my folded tag.

Open up a new paint and have a blank canvas that is roughly the same size as your previous image-

Open up a text box and type in your care instructions, add your website, or what ever you want the back of your tag to say. You could also insert another image.
To open text click on the A in the upper left hand corner, then click on your photo. I suggest using size 8-9 font and an easy to read text like Times New Roman, Calibri, or Arial.

Just as before flip your image Horizontal, then flip it to the RIGHT. Save as Image 2

Your final back image should look like this-

Step TWO-

Open up Microsoft Word

Go to Page Layout>Margins>Narrow.
This will allow us to put as many labels on our sheet as possible.

Go to the top left again- Insert>Picture>Image1
For double sided labels add your second image- Insert>Picture>Image2

Now we need to make sure our labels are the proper size. 

Click on your image to select it.Click the tab that says 'Picture Tools' format.
On the far left adjust your size to fit your ribbon. My ribbon was 1.5 inches wide so I made my images 1.3 inches tall.

Hold the Ctrl key and hit A this will select your images. Hold the Ctrl key and hit C. Click to the right of your images, hold the Ctrl key once more and press V.  

(Crtl A= Select all, Ctrl C= Copy, Ctrl V=paste)

Copy and paste your images until your page is full of labels.

Our labels are ready to print! Do a test run on regular paper first to be sure your labels are the right size and are what you want then print out onto your t-shirt transfer paper. Since we already took the time to mirror our image all you need to do is hit print! :)

Once your labels are printed, cut your strips and iron them to your ribbon following the instruction that came with your transfer paper. 

When the labels are cool cut them out and fray check the ends so the ribbon does not fray apart. 

Allow them to dry and store them until ready to use! 

Enjoy your labels!!!

<3
Cassandra

What is a Nursing Necklace?

Since June 7th, Nursing necklace have been a new featured item in my shop and I have had many ask me, "What is a nursing necklace?" That's a great question!

A Nursing Necklace is simply a stylish necklace that can withstand children.

Around the ages of 3-4 months babies start to notice more about the world around them. They begin to reach, rub, pull, and pinch what they are close to. Most of the time, that's mom. A nursing necklace is something for little ones to safely explore, aka pinch, pull, and during teething phases, nibble. Nursing necklaces are great to wear while breast-feeding, bottle-feeding, wearing baby in a sling or carrier, or even just because they look nice.

They make great gifts for new moms!

What types of nursing necklaces are there?
There are many types of Nursing Necklaces to suit a wide variety of styles!
First, there are the kind I make, Gemstone Nursing Necklaces-

Gemstone Necklaces usually have a gemstone focal. Some, like mine, are also beaded up the string. (My little guy is a pincher, so he likes to roll the beads inn is fingers tips.) Many moms like gemstone necklaces  not only because of their unique and beautiful focal, but often for the metaphysical and healing properties that are said to resonate within the stone. Each stone has different properties.






Next, there are beaded Nursing Necklaces-

Beaded Nursing Necklaces are just that, nursing necklaces that are all beads. They are usually made from wood, but may also be made of bone, glass, resin, crochet beads, fabric over wood, or gemstones.
 

Are they Safe? A majority of Nursing Necklaces are made with safety in mind. Colored beads are usually made with non-toxic dyes and wood beads are finished with non-toxic waxes. Beads are TIGHTLY knotted in and cords can usually withstand 20+ pounds of pulling.

(Click photos to visit their shops!)



Lastly, we have an example of a Teething Ring Nursing Necklaces,

A teething ring necklace is just as it sounds. A necklace with a teething ring. The rings are usually a natural undyed, unwaxed, wood. Some only have a ring but many are also beaded. Great for little ones who are teething and going through biting phases. (These two are an example of crochet beads and fabric over wood beading.)


Many Nursing Necklace are adjustable, either with sliding knot closures, or ties, the mother can wear a majority of them at any length she chooses.

So I encourage you, if you are a mother, know someone who is going to be a mother, a grand-mother, or just love some of these unique styles, click the photos and check out the shops!








<3
Cassandra

Plans for a portable, light weight, chicken run for less than $30

What do chickens have to do with jewelry? Absolutely nothing. I just love my chickens. I mean common, they're adorable! Their names are Applesauce (left) and Puddin' (right) and we are going to be getting 2 more ladies to add to our family this Tuesday! They live in a cute little coop with a marigold garden and they LOVE to eat fresh grass.

Grass and bugs are SUPER important to a chicken's diet. Every time I see egg cartons that say, vegetarian  or grain fed, I want to roll my eyes in annoyance. Chickens aren't vegetarians, and the last thing I want my chicken eating a ton of is grain! By nature chickens eat lots of bugs, grass, seeds, rocks (yes rocks, they need those to digest their food!) berries, and other random things that they may find while scratching about. What they eat makes a difference in the quality of their life and the quality of their eggs. A happy healthy hen lays eggs with nice dark orange yolks and a great egg-y flavor, while a cooped up grain-fed hen produces light yellow yolks with very little taste. See for yourself!

The top two on the right are my girls eggs and the one on the bottom left is a store bought, grain-fed, free-range, organic egg. (lots of fancy labels don't equal good quality!) At this point you may be thinking... wait, wasn't the title of this post how to make a portable chicken coop? Yes, yes it was. I just felt it was worth mentioning, that whether you are an urban farmer like "I like to think" I am or a farmer with lots of acres and a big operation, I feel it is important to know the value of giving hens the basic primal need of bugs and pasture.

So here it is, a photo of our inexpensive, lightweight and easily movable run.

It is constructed from very inexpensive materials that you don't need to worry about going bad in the weather. I have built other versions of portable runs before, including wooden collapsible ones, and they just don't seem to hold up to the weather, they are time consuming to make and cost a fair amount of  $$$.

So here are the instructions, (thanks to my wonderful and awesome husband) including the pricing and cut list.
(click the photo to make it bigger)

The run is made from 1/2" PVC piping and 24" wide chicken wire held on with zip ties.

It measures 2 feet tall by 4 feet wide and 5 feet long.
Husband says it is self explanatory  but if you do have questions or need more through instructions just leave a comment! We would be happy to answer any questions!

Happy grazing!
<3 Cassandra